Administer > Manage the Orion Web Console > Manage Orion polling engines > Use Additional Polling Engines

Use additional polling engines to balance polling

SolarWinds Orion scalability engines, including Additional Polling Engines and Additional Web Servers, extend the monitoring capacity of your SolarWinds installation.

Requirements and recommendations will vary from product to product. Go to your product's documentation page in the SolarWinds Success Center for more information.

Pre-flight checklist

Before you install an Additional Polling Engine in your environment, be sure you complete the following actions:

Be sure your product uses Orion Platform 2016.2 and later.

To find out the Orion Platform version, log in to the Orion Web Console and see the Orion Platform version in the footer. If the version is 2016.1 and earlier, see Orion Bundle for additional servers.

Install or upgrade the Main Polling Engine.
Ensure product versions match between the Primary Polling Engine, all Additional Polling Engines, and Additional Web Servers. This includes the version of .NET. Find a version number listed in the footer of the Web Console. If your product versions do not match, you must upgrade before you can install Additional Polling Engines.
Verify port requirements for your SolarWinds product.
Acquire a user name and password with administrative privileges to the Orion Web Console on your Main Polling Engine.
Be sure the Additional Polling Engine uses the same SQL database as the Main Polling Engine.
If you configured an alert with a Send Email action to trigger on a node monitored by an Additional Polling Engine, confirm that the Additional Polling Engine can access your SMTP server.

Add the IP address of your Additional Polling Engine to Windows Servers on the Security tab.

Make sure that the following options are set:

  • Ensure that a case-sensitive community name has been specified.
  • Ensure that Accept SNMP packets from any host is selected OR ensure that the ipMonitor system is listed within the Accept SNMP packets from these hosts list.
  • Ensure that your network devices allow SNMP access from the new polling engine. On Cisco devices, you can for example modify the Access Control List.

Port requirements for Additional Polling Engines

Additional Polling Engines have the same port requirements as Main Polling Engine. The following ports are the minimum required for an Additional Polling Engine to ensure them most basic functions.

Port Protocol Service/
Process
Direction Description
161UDPSolarWinds Job Engine v2OutboundThe port used for sending and receiving SNMP information.
162UDPSolarWinds Trap ServiceInboundThe port used for receiving trap messages.

1433

TCP

SolarWinds Collector ServiceOutboundThe port used for communication between the APE and the Orion database.
1801TCPMessage Queuing WCFInboundThe port used for MSMQ messaging from the Orion Web Console to the Additional Polling Engine.

5671

TCP

RabbitMQBidirectional

The port used for SSL-encrypted RabbitMQ messaging from the Orion Web Console to the Additional Polling Engine.

17777

TCP

SolarWinds Information ServiceBidirectional

The port used for communication between the Additional Polling Engine and the Orion Web Console.

Install an Additional Polling Engine

  1. Click Settings > All Settings > Polling Engines.
  2. Click Download Installer Now.
  3. Run the installer on the computer you want to use as your additional polling engine or website.
  4. Enter the main Orion server credentials.
  5. Choose either Additional Polling Engine or Additional Website. If you want to install a backup server for High Availability, view SolarWinds High Availability requirements first.
    The packages are downloaded from the main Orion server.
  6. Follow the onscreen instructions to complete your installation and configuration.
  7. The Additional Polling Engine or Additional Web Server is installed, together with all hotfixes for products released later than September 2016.

    For example, when installing or upgrading to SAM 6.3 and IPAM 4.3.2, any hotfixes for SAM 6.3 are installed. You must install the hotfix for IPAM manually.

    Repeat installing on all Additional Polling Engines and then on all Additional Web Servers in your environment.

    Activate the Additional Polling Engine licenses.

Activate Additional Polling Engine licenses

  1. In the Orion Web Console, click Settings > All Settings > License Manager.
  2. Locate the license in the License Manager, click Activate, and complete the activation.

    The Additional Polling Engine license is activated. Review the polling engine it is assigned to, and re-assign the license if necessary.

When finished, specify nodes to be polled by the Additional Polling Engine.